Home > Sheet and Plates > Stainless Steel 410S Sheet and Plates
Mbemba Stainless stands out as a top-notch manufacturer and supplier located in Kinshasa, Congo, specializing in high-quality Stainless Steel 410S Sheets and Plates for a variety of industries. With a strong commitment to durability, precision, and customer satisfaction, Mbemba Stainless ensures that their products meet international standards. Their Stainless Steel 410S Sheets and Plates are celebrated for their remarkable resistance to oxidation and corrosion, making them perfect for both high and low-temperature settings. The company prides itself on delivering superior finishes, precise dimensions, and consistent quality, earning a solid reputation in the stainless steel market throughout Congo and its neighboring regions.
Stainless Steel 410S Sheets and Plates are ferritic stainless steels that contain 11.5–13.5% chromium and have low carbon content, which boosts their weldability and corrosion resistance. They offer moderate strength, impressive oxidation resistance up to 815°C, and lower hardenability compared to the 410 grade. This material boasts a tensile strength of around 380–550 MPa and excellent thermal stability. Thanks to its well-balanced composition, SS 410S retains toughness and ductility even after extended exposure to high temperatures, making it a fantastic choice for fabrication and heat-resistant applications.
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
| Element | SS 410S |
| C | 0.08 max |
| Mn | 1 max |
| Si | 1 max |
| P | 0.040 max |
| S | 0.030 max |
| Cr | 11.5 – 13.5 |
| Fe | 85 |
| Element | SS 410S |
| Density | 7.8 g/cm3 |
| Tensile Strength | psi – 64,400, MPa – 444 |
| Yield Strength (0.2%Offset) | psi – 42,000, MPa – 290 |
| Elongation | 33 % |
| Hardness | Rockwell B (HR B)- 75 / Brinell (HB)- 65 |
Contact us to get a quick quote for your requirement.
Stainless Steel 410S hot rolled sheets possess excellent corrosion resistance with high strength and toughness. The sheets come in a wide range of thicknesses, starting from 1.5 mm up to 20 mm with widths up to 2000 mm. These are suitable for high-impact resistant applications.
Stainless Steel 410S Cold Rolled Plates have corrosion resistance along with a smooth, bright surface finish. Usually made available in width up to 1500mm and in different thickness ranges such as 0.5-6 mm these plates are specially suited for use in precision engineering and for critical applications where closer tolerances apply.
Stainless Steel 410S Chequered Sheets have a raised pattern, which gives excellent corrosion and slip resistance. These sheets are available in various thicknesses from 1.2 mm to 6 mm and up to 2000 mm x 1000 mm dimensions, which make them suitable for flooring and decorative applications.
Stainless Steel 410S Perforated Plates combine protection against corrosion with increased ventilation and aesthetics. The perforated plates are available in a number of hole sizes and patterns, available in thicknesses ranging from 1 mm up to 4 mm and available in dimensions up to 2500 mm × 1200 mm for filters and screens.
The Shim Sheets of Stainless Steel 410S are available with corrosion resistance and precise control over thickness. These sheets are available in 0.1 mm thickness up to 1000 mm x 1000 mm, cut to size for fine-tuning mechanical fits.
Stainless Steel 410S polished plates offer outstanding corrosion resistance and have a highly reflective finish. The plates are usually available in sizes up to 2000 mm x 1000 mm with thickness between 1mm and 6mm. Stainless Steel 410S Polished Plates are used in aesthetic applications as well as in decorative purposes.
Mbemba Stainless guarantees a high customer experience by completing all the necessary documentation of high-quality Stainless Steel 410S Sheets and Plates. We will provide our customer with commercial invoices, packing list, fumigation certificate, heat treatment chart, quality assurance plan, and lab test reports certified by NABL-approved labs to prove authenticity and superior quality in our products that can give complete trust and satisfaction to our respected customers. Additionally, our Stainless Steel 410S Sheets and Plates are supplied with test certificates such as MTC as per EN 10204/3.1b, PMI Test Certificate, a 100% radiography test report, and Third Party Inspection Certificate. These certificates reflect our customer-focused approach and our very strong commitment to product excellence.
These Stainless Steel 410S Sheets and Plates find extensive use in automotive exhaust systems, heat exchangers, refinery equipment, and furnace components due to their outstanding oxidation and corrosion resistance. They’re also utilized in gas turbine parts, petrochemical processing, and food processing industries where thermal stability is crucial. Moreover, their excellent formability and weldability make them ideal for applications in construction, chemical plants, and power generation systems. The blend of durability, heat resistance, and ease of fabrication makes 410S Sheets and Plates a dependable material for challenging industrial environments.
©2024 Mbemba Stainless All Rights Reserved.
